- Home
- Electric Vehicles
- Compare
- ChargeStack 1000 vs Estar EV Fast Charger 160KW
ChargeStack 1000 vs Estar EV Fast Charger 160KW
General for EV Charging Station
|
Model
|
ChargeStack 1000
Estar EV Fast Charger 160 kW |
|
Manufacturer
|
Sungrow Power Supply Co., Ltd.
Estar (Shijiazhuang Estar New Energy) |
|
Launch Date
|
October 2025
|
|
Status
|
Available (commercial launch phase)
Available (Commercial Product) |
|
Country of origin
|
China
China |
EV Charging Station Performance
|
Power Output (kW)
|
1 MW – 3.5 MW (modular and scalable)
160 kW (max) |
|
Voltage (V)
|
Up to 1,000 V DC (estimated for MCS standard)
100 V – 1000 V DC |
|
Current (A)
|
Up to 1,500 A (MCS) / 500 A – 800 A (CCS2 oil-cooled)
532 A |
|
Charging Levels
|
DC Fast / Megawatt Charging
DC Fast Charging (Level 3) |
|
Charging Speed
|
600 kWh in 30 minutes (10–95% SoC for heavy trucks)
Depends on EV battery capacity and acceptance rate |
Compatibility
|
Connector Type(s)
|
MCS, CCS2 (oil-cooled)
Single or dual gun; 5 m cable |
|
Supported EV Standards
|
CCS2, MCS (Megawatt Charging System)
CCS1, CCS2, CHAdeMO, GB/T |
|
Vehicle Communication Protocols
|
OCPP 2.0.1
OCPP 1.6J, remote monitoring, load balancing |
Electrical / Installation
|
Input Power Requirements
|
High-capacity grid (medium voltage, multi-phase)
400 V AC ±15% | 3-Phase | 45–65 Hz |
|
Efficiency
|
97%
|
|
Onboard Conversion
|
Integrated AC/DC conversion modules
AC → DC onboard |
|
Cooling System
|
Oil-cooled (for CCS2) / Liquid-cooled (for MCS)
Fan-cooled (air cooling) |
Safety & Compliance
|
Overcurrent Protection
|
Supported (internal monitoring)
Yes |
|
Ground Fault Protection
|
Integrated
Yes (insulation detection) |
|
Thermal Protection
|
Active liquid/oil cooling and thermal sensors
Yes (over-temperature) |
|
Certifications
|
MCS / CCS2 / OCPP 2.0.1 compliant
|
|
Standards
|
SAE J3271 (MCS) / IEC 61851 / IEC 62196 (expected)
|
Smart Features
|
Connectivity
|
Wi-Fi, Ethernet, Cellular (remote monitoring)
4G / LAN (Ethernet) |
|
User Interface
|
LED status lights, ergonomic cable handle, web dashboard
Display + LED indicators + Card reader |
|
Payment Options
|
RFID / App integration (future support)
RFID / Card swiping / Mobile app support |
|
Smart Charging
|
Demand response, peak-shaving, VPP integration
Yes (remote monitoring & control) |
|
Load Balancing
|
Full-matrix power distribution across stacks
Supported |
|
Scheduling
|
Cloud-based charge management and analytics
Backend system support |
Environmental & Physical
|
Operating Temperature Range
|
–40 °C to +75 °C (derates above 60 °C) |
|
Installation Type
|
Floor-standing (outdoor / fleet depot use)
Floor-standing cabinet |
|
Cabin Type
|
Oil-cooled heavy-duty cable, ergonomic design
5 m standard |
|
Dimensions
|
700 × 600 × 1900 mm |
Disclaimer Note
We can not guarantee that the information on this page is 100% correct
